ResMed Comfort Sleeve for Standard Breathing Tube

The Tubing Liner is designed to reduce condensation and temperature loss on ResMed or standard air tubing when connected to a device.

Placement

Fully open the zipper on the tube liner and peel off the Velcro™ strap. Extend the lining and put it with the inside facing up.

Thread one end of the air tube through the closed end of the liner zipper until the rubber handle pops out.

Hold the rubber grip in place and zip the tube liner closed.

Fold the excess end of the zipper against the lining and secure it with the Velcro strap.

The only thing you should be able to see are the rubber handles.

cleaning instructions

The lining should only be hand washed or dry cleaned.

When the lining is new, please wash it separately as it may cause color bleeding. Do not use bleach.

To wash the tube liner:

• Wash it in cold or lukewarm water with a mild detergent.
• Rinse it well and let it drain.

Note: Hand washing the tube liner does not relieve you of the need to clean the air tubes.

Elimination

The tube liner and packaging do not contain hazardous substances and can be disposed of with your normal household waste.

Attention

Do not use the tube liner if the ambient temperature is above 30°C. At higher temperatures, the ambient temperature in the mask may be too high.